Væske vandopløselig gødningsproduktionslinje

Raw Material Preprocessing Equipment:
- Fish Meal Crusher or Grinder: If using fish or other organic raw materials, this equipment reduces them to smaller, manageable sizes before further processing.
- Screening Machine: Separates unwanted large particles from the fine materials to ensure consistency in the raw materials.
Mixing and Dissolution Equipment:
- Blandetank: A large tank with a mixer to combine fish protein, minerals, vand, and any other additives into a homogenous liquid solution.
- Hydrolysereaktor: In the case of fish protein-based fertilizers, hydrolysis (using heat, pressure, or enzymes) breaks down the proteins into soluble components, creating the nutrient-rich solution.
- Stirring System: Ensures consistent blending and helps dissolve the raw materials into the solution.
Heating and Dissolving Systems:
- Heating Equipment (Boilers or Electric Heaters): Heat may be required for hydrolysis or dissolving the nutrients into water, especially for creating soluble proteins and minerals.
- Temperature Control System: Maintains optimal temperatures for efficient dissolution and hydrolysis of the raw materials.
Filtration and Purification Equipment:
- Filter Press: Used to filter out insoluble solids and impurities from the liquid fertilizer solution to ensure it is pure and consistent.
- Membrane Filtration System: Further refines the liquid by removing any micro-particles or residues that could affect the quality of the final product
Storage and Aging Tanks:
- Storage Tanks: These tanks hold the finished liquid fertilizer before it’s packaged or shipped. They should be made of materials that are resistant to corrosion, especially if the solution is acidic or contains reactive substances.
- Aging Tanks (Valgfri): Sometimes used to allow the fertilizer to “mature,” which can improve the stability of the nutrients in the liquid.
Emballageudstyr:
- Påfyldningsmaskiner: These machines automatically fill bottles, drums, or large containers with the finished liquid fertilizer.
- Capping and Labeling Machines: Secure the containers and apply labels with necessary product information and branding.

Fish Protein or Fish Hydrolysates:
- These are organic materials rich in amino acids, peptides, and proteins, often sourced from fishmeal or fish processing by-products. They provide essential nutrients like nitrogen and phosphorus.
Vand:
- Water is a primary solvent used in dissolving and blending the raw materials to create a liquid form of the fertilizer. It facilitates nutrient solubility and allows for easy application to plants.
Mineral Nutrients:
- Nitrogenkilder: Urea, ammonium nitrate, or ammonium sulfate provide nitrogen, which is essential for plant growth.
- Fosforkilder: Fosforsyre, monoammonium phosphate (Kort), or diammonium phosphate (Dap) can be used to provide phosphorus.
- Kaliumkilder: Kaliumnitrat, potassium sulfate, or potassium chloride provide potassium, vital for plant health.
- Mikronæringsstoffer: Trace elements like zinc, jern, Mangan, kobber, Molybdæn, and boron are essential for plants and may be added in soluble forms.
Acidic or Alkaline Agents:
- Sulfuric Acid, Phosphoric Acid, or Nitric Acid: These are used to adjust the pH of the solution, ensuring nutrient solubility and stability.
- Lime or Potassium Hydroxide: These may be used to neutralize the solution or balance the pH if necessary.
Chelating -agenter:
- Edta (Ethylene Diamine Tetraacetic Acid) eller DTPA (Diethylenetriamine Pentaacetate): These are used to bind trace minerals and prevent them from precipitating, making them more bioavailable to plants.
Organic Additives:
- Tangekstrakter: Rich in micro-nutrients and growth hormones, seaweed extracts can boost the overall performance of the fertilizer.
- Aminosyrer: Additional amino acids may be added to enhance the fertilizer’s effect on plant growth and stress resistance.
Surfactants or Wetting Agents:
- These chemicals help improve the spreading and penetration of the fertilizer solution when applied to plants or soil.
Preservatives:
- Preservatives like formaldehyde eller sodium benzoate can be added to extend the shelf life and prevent microbial growth in the liquid fertilizer.

Efficient Nutrient Absorption:
- Liquid fertilizers are quickly absorbed by plants through their roots and leaves, providing faster nutrient uptake compared to solid fertilizers. This leads to quicker results and more efficient plant growth.
Customized Formulations:
- The production line can be tailored to create specific nutrient blends for different crops, soil types, og vækststadier, offering versatility in meeting diverse agricultural needs.
Forbedret opløselighed:
- Liquid fertilizers are completely soluble in water, making them ideal for irrigation systems, foliar spraying, or fertigation. This ensures even distribution of nutrients, reducing the risk of nutrient imbalances.
Bæredygtighed:
- Liquid fertilizers often use organic and eco-friendly raw materials, such as fish protein or plant extracts, promoting sustainable agricultural practices. Derudover, the use of by-products (like fishmeal) can help reduce waste.
Reduced Risk of Fertilizer Loss:
- Unlike granular fertilizers that can be lost due to leaching or runoff, liquid fertilizers provide more controlled application and minimize nutrient waste, improving nutrient use efficiency.
Enhanced Crop Yield:
- The nutrients in liquid water-soluble fertilizers are readily available to plants, fremme sundere vækst, Stærkere rodsystemer, and higher crop yields.
Ease of Application:
- The liquid form makes it easier to apply, especially for fertigation systems (combining irrigation with fertilizer application). It is also ideal for foliar feeding, where nutrients are sprayed directly onto the plant leaves.
Precise Dosage Control:
- The production line can create fertilizers with precise nutrient concentrations, allowing for accurate dosing and preventing over-fertilization. This leads to cost savings and a more efficient fertilizer use.
Omkostningseffektiv:
- While liquid fertilizers may seem expensive at first, they often offer greater efficiency, requiring lower quantities to achieve desired results. Desuden, the streamlined production process allows for scalability and cost optimization.

Omkostningerne ved en gødningsproduktionslinje inkluderer hovedsageligt følgende aspekter

Omkostningerne ved hver produktionslinje varierer afhængigt af produktionskapacitet, grad af automatisering, og specifikke behov. Udfyld nedenstående formular, så giver vi dig et nøjagtigt tilbud!

Udstyrsinvesteringer: Kerneudstyr såsom knusning, Blanding, granulering, tørring, Screening, og emballage.
Råmaterialeomkostninger:Organiske eller kemiske råvarer, Tilsætningsstoffer, osv.
Arbejdsomkostninger:arbejdstageres løn, teknikere, og ledere.
Energiforbrug:elektricitet, brændstof (vand, kul, naturgas, osv.)
Vedligeholdelse og afskrivning: Reparation af udstyr, Udskiftning af dele, osv.
Emballage og transport: emballagematerialer, Logistikomkostninger.
Miljøbeskyttelse og overholdelse:Miljøbeskyttelsesudstyr, Omkostninger til emissionstyring.

Efterlad din besked

Hvis du er interesseret i vores gødningsudstyr, Send venligst dine krav og kontakter, og så kontakter vi dig om to dage. Vi lover, at alle dine oplysninger ikke lækker til nogen.

Teknisk styrke

- Virksomheden blev grundlagt i 2005 og har fokuseret på forskning og udvikling og fremstilling af organisk gødningsudstyr til 20 år. Det har bygget en 40.000 m stor skala organisk gødningsudstyrsproduktionsbase, ved hjælp af avanceret granulering, Tørring og screeningsteknologier for at forbedre produktionseffektiviteten og produktkvaliteten.

- En selvbetjent import- og eksportvirksomhed med mere end 80 Professionelle ingeniører over hele verden, tjener mere end 100 lande og regioner over hele verden, 5,000+ Kundeservicesager, 10 behandlingscentre, 3 Laserskæremaskiner, Og mere end 60 udstyr af forskellige typer.

- Opretholdelse af langsigtet og omfattende samarbejde med mange videnskabelige forskningsinstitutter og universiteter, with a professional R&D team, Det kan kontinuerligt optimere udstyrets ydeevne i henhold til markedets efterspørgsel.
Udstyrskvalitet

- Høj styrke slidbestandige materialer, Carbon Steel Q235/Alloy er valgt for at sikre, at udstyret er holdbart og reducere vedligeholdelsesomkostninger.

- Vedtagelse af intelligente kontrolsystemer for at forbedre niveauet for produktionsautomation og reducere manuel afhængighed.

- ISO, Ce, SGS International Certification
Produktionskapacitet

- Med storskala produktionskapacitet, Det kan opfylde forskellige krav til produktionskapacitet (lille, mellemstore og store produktionslinjer).

- Et komplet udvalg af udstyrsmodeller, Velegnet til produktion af forskellige typer gødning, såsom organisk gødning, Forbindelsesgødning, Biologisk gødning, Vandopløselig gødning, flydende gødning, osv.
Tilpasset service

- Personligt design kan leveres i henhold til kundens behov, inklusive produktionskapacitet, Webstedslayout, Miljøbeskyttelsesstandarder, osv.

- Giv et komplet sæt produktionslinjeløsninger, inklusive valg af udstyr, installation og idriftsættelse, Teknisk træning, osv.
Prisfordel

- Direkte fabriksforsyning, Reduktion af mellemmandens linje, Og prisen er mere konkurrencedygtig.

- Udstyret har høj energieffektivitet, reducerer energiforbruget, og hjælper kunder med at reducere langsigtede driftsomkostninger.
Eftersalgsservice

- Direkte fabriksforsyning, Reduktion af mellemmandens linje, Og prisen er mere konkurrencedygtig.

- Udstyret har høj energieffektivitet, reducerer energiforbruget, og hjælper kunder med at reducere langsigtede driftsomkostninger.